I have a Pixel 6a with software build: 2024030900
JBL Charge 3, Pixel Buds A series and Mazda (Car) bluetooth connection working fine (Phone calls and Bluetooth audio)
Whats not working is my Galaxy Watch6.
I maked the experience if I reset my watch completly, I can connect and everything is fine for around 1h. After that its disconnect and is not able to reconnect by bluetooth (only wlan is working).
Steve868686 same here with Pixel8 latest grapheneos stable build and galaxy watch 6.
Build: 2024030900
Phone: Pixel 8 Pro
Bluetooth is shot, nothing will connect properly, only if I delete the profile and and re-pair the device I can then connect, but when I disconnect, I can't reconnect again.
Devices not working: Ears 2, Galaxy Watch 6 Classic, Black Shark II Headphones, Ford Ranger and various other audio devices like the Bose Soundlink and bluetooth enabled speakers.
Devices working: None
Everything was fine as of 3 days ago, after this latest update, bluetooth is broken, I will have to stop using the phone until an update is pushed out and switch back to my iPhone as bluetooth is extremely important to me, I need my headphones for work purposes, I pretty much spend 8 to 10 hours a day with head phones on, only switching them out to charge.
Recently made an account to say I have the same connection issues with a Pixel 8 with build 2024030900 and a Galaxy Watch 6 Classic. I'll make the sacrifice and flash the stock OS back to see if I have the same issues on stock.
On a side note, neither my Galaxy Buds2 Pro nor my old Galaxy Watch 3 has any connection issues.
Build: 2024030900
Phone: Pixel 6
Devices not working: Galaxy Watch 6 Classic (SM-R950)
Devices working: AIAIAI TMA-2 Studio Wireless+ Headphones, Anker Soundcore 3, Samsung Soundbar B5
The watch's behaviour is very similar to what's already been reported here: it constantly flips between Other devices and Saved devices. The only way I can get it to stay connected for any length of time is by forgetting the Bluetooth device. The Galaxy Wearable app then resets itself (thanks, Samsung) and the only way to reconnect is by doing a full factory reset on the watch. Otherwise, none of the app's setup seems to work. Even that fix is only temporary, though; the next time the watch disconnects, it doesn't successfully reconnect.
NXG-3D I will have to stop using the phone until an update is pushed out and switch back to my iPhone as bluetooth is extremely important to me, I need my headphones for work purposes, I pretty much spend 8 to 10 hours a day with head phones on, only switching them out to charge.
You can't use a USB-C to audiojack dongle in the meantime?
Panda-na I dont have wired headphones or a dongle unfortunately, and being tethered to the phone would be a pain in the backside, I use Bluetooth almost exclusivly and I switch back and forth from my phone to a PC, depending on if its a phone call or a Teams call, path of least resistance is to dust of the iPhone until the issue is resolved.
hainguyenhoang
Well, even after several manual disconnects/reconnects, turning off/on Bluetooth on both devices, and rebooting both devices, I cannot reproduce the same issue on stock OS, build AP1A.240305.019.A1
emacsomancer I have this same issue with my Pebble Time and my Pixel 7 after the QPR2 update. I also have a pebble2 HR which does pair and work just fine weirdly. I have not tested with the stock Pixel 7 QPR2 update, only with GrapheneOS since I don't want to reflash my phone right now.
There's a sortof similar issue posted on the gadgetbridge gitlab https://codeberg.org/Freeyourgadget/Gadgetbridge/issues/3596 . Unconfirmed if it's related or not though.
If I turn off my Watch6 my other devices appear to work properly. If my Watch6 is on nothing will work correctly, including the Watch6.
xaz2fiaghi After some more experimenting the best way to describe my Pebble 2 HR connection with gadgetbridge is "unstable". I can pair it, which takes a few tries. Then if I put the pebble in airplane mode or go out of range for a while, I have to try to pair again which requires tapping the pair button on the android pair dialog popup several times but it eventually does connect again. Happy to provide logs if that's helpful.
Still using my pixel 6a with Sw build: 2024030900
A Galaxy Watch 6 update released today.
But I have still the same failure.
I just reverted to stock Android and I can confirm that galaxy watch works properly again. Pixel 7a.
That's great to hear. Has anyone heard if GOS will be fixing this or are smart watches on the back burner for the time being?
xaz2fiaghi How are you getting it to pair? Are you removing and re-adding it to Gadgetbridge?
ECU Connect - Ecutek app not working on latest Bluetooth update. OBD interface not connecting via Pixel 7 Bluetooth. Was working seamlessly before update.
Ive had to disable Bluetooth completely now, anything like my Watch trying to constantly connect is causing battery drain, my watch went from 2 day battery life to 8hrs, phone was also discharging quicker, once I disabled bluetooth, everything was back to normal.
Build: 2024030900
Phone: Pixel 7 Pro
Apple Airpods (Gen 2) are still working, but sometimes initial connection has issues. It will say there was a device error. Usually resolves on its own or by restarting Bluetooth.
p5a on 2024031100 as of today, and before updating I noticed its behavior with BT had changed: there isn't a BT icon at the upper right of the screen after clicking "Show all devices / Bluetooth will turn on." In the home-screen pull-down the Bluetooth oval is illuminated but the phone will not connect to just one of my two UE Boom 2s. The other is fine, everything proceeds normally. I have had the "Notify about system process crashes" on since I loaded GrapheneOS on this phone, and have had none. 2024031100 did nothing to modify the behavior.
My p8 gets in touch with either of the Boom 2s quickly and reliably.
I figured this would be the case as I haven't seen much of any complaining doing Google searches.
