Hello,
I have 3 pixel 4a in graphenos for almost 3 years, I have not had any installation problems. After the failure of a device, I just bought a new one.
I proceed with the installation and in the process of flashing with Downloaded sunfish-factory-2024080800.zip release., the process hangs on unpact product, the device shows a menu "GraphenOS fasbootd and I have nothing more that changes. I tried all the options in this menu without result.
What to do? I have carried out the process about ten times and I always arrive at the blockage in the same place.
Thank you for your help
Blockage installation graphenos fasbootd menu
- Edited
Are you running the web installer on Windows?
The Pixel 4a is a legacy device, and still requires the fastboot drivers be installed on your PC to flash GrapheneOS.
To do that you'll need to follow the instructions specific to the Pixel 4a here: https://grapheneos.org/install/web#connecting-device
Good evening arbrequell,
Thank you very much for answering my message.
Yes I use the web under windows, with Chrome and I have no connection problem. I can unlock and block the bootloader without problem, I can flash the pixel, the problem occurs when it unpacks the package. After about 15% in view of the progress bar, it freezes and the fastbootd menu aooarait on the pixel
As per the instructions I provided in the previous link, you need to install the fastboot driver for Windows. You'll find it under optional Windows updates when the phone is plugged in whilst in the bootloader interface.
Good evening,
After many attempts without result, still the blockage during the unpacking. I then used another Tecklass PC with the same version of windows, chrome and of course the fast boot driver, the process went normally, I flashed the pixel and then the unpacking followed.
So I have no explanation on what happens with the other PCs.
Thanks again for your support.